Determined I needed to use Click Bond parts to secure wiring to the instrument panel. Found my parts and determined I already had what I needed. Found a good source (The Flight Shop) for adhesive and cleaner and placed an order.
Modified Molex minifit 3 four pin connector by sanding enough of the housing off so it will fit through the dimmer switch holes in the panel. It is now a three pin connector which is all I needed.
Reviewed wire name list and prepared a file to use in printing the labels for the wires. Figured out how to print again using the label editor software and excel and started printing. Ran out of heat shrink tubing quickly. Estimated the amount of heat shrink I would need and placed an order. Also researched and placed an order for label tape with high adhesion and for vinyl self lamination overwrap labels for cables with BNC connectors already installed. Determined I need to update the wire name list to add pin numbers for the individual wires.